Thursday, September 5, 2019

Computer Assisted Instruction (CAI) Research Validity

Computer Assisted Instruction (CAI) Research Validity Internal, External and Construct Validity Introduction Computer Assisted Instruction (CAI) has been utilized with success in students with or without learning disabilities and it is mainly attributed due to increased time concentrated on reading materials or exercises on the computer. It offers productive practice and time management and is an effective tool to used as a supplement to providing drills (Williams, Wright, Callaghan, Coughlan, 2002). Some of the advantages that the CAI provides inside the classroom include one-on-one exercise with minimal supervisory time involving the teacher. In many cases, instant feedback to students allows mistakes to be rectified immediately. Certain programs offer features that monitor speed and accuracy of answers and the regularity of instruction for subject mastery (Wong, 2008). Internal Validity Threats In a research study done by Coleman-Martin, Heller, Cihak, Irvine (2005), a slower acquisition rate score was recorded when a different Windows version (i.e., XP versus Windows 98) was used during one of the test sessions. The variation of the platform caused the PowerPoint slide presentation to run slower than the prior sessions that resulted to disrupting its timing and consistency. Computer skills, familiarity with the software programs, and prior knowledge in the question format (i.e., multiple choice) are factors to consider that might have influence the rate at which the students learned words identification (Coleman-Martin, et al., 2005, p. 90). Similarly, according to research study conducted by Fuchs, L., Fuchs, D., Hamlet, C., Powell, S., Capizzi, A., Seethaler, P. (2006) on the effects of CAI on number combination skill in at-risk first graders, their procedures did not take into consideration the keyboarding skills of at-risk first graders and the possibility that errors related to the learners typing skills reduced the effectiveness of the CAI. External Threats to Validity According to Savage, R., Deault, L., Abrami, P., Hipps, G. (2009), one limitation found on their research regarding a randomized controlled trial study of the ABRACADABRA reading intervention was that students with inferior literacy and associated skills during pretest were more likely not to show up for testing at follow-up. The researchers believed that this is an issue of experimental mortality insinuating that the postponement of posttest outcomes are almost certainly less generalizable to typical reader samples than the more immediate posttest statistics ( Savage, et al., 2009, p. 602). Threats to Construct Validity Bannert (2000) and Van Gog (2005) research study suggested that giving the students control over portions of their instruction allow them to better negotiate the cognitive challenges placed on them as students. They further noted that learner-control participants performed better on a test of transfer than the participants who received no control. Van Gog (2005) hypothesized that over time, improved performance would be visible during training situations along with the capability of the learner to assess and rectify future problematic situations when learners are progressively awarded with more control over their instruction as their skill level intensified. In contrast, Eom and Reiser (2000) revealed that junior high students who were given the opportunity to control their instruction displayed considerably worse performance than those who were not allowed to control their instruction. The same results were reported by several researchers (Farrell and Moore, 2000 and Swaak and de Jong, 2001) who stated that providing students control over their instruction concludes in trivial or insignificant advancement. It may be a case of poor construct definition where a construct may have been mislabeled or defined at a wrong level either too general or too specific. In this case, it is possible that establishing the types of control given to the students will be a crucial factor. Impact of Validity Issues Several validity issues could affect the envisioned research regarding the effectiveness of the type of CAI programs that are currently used as a remediation tool for at-risk students. One limitation is the inclination for technology difficulties because technology can be unpredictable. In accomplishing particular learning objectives, the learning tool such as the software programs used in conjunction with the CAI should be developmentally appropriate. References Bannert, M. (2002). Managing cognitive load recent trends in cognitive load theory. Learning and Instruction, 12, 139-146. Retrieved February 16, 2010, from EBSCOHost database. Creswell, J. (2009). Research design (3rd ed.). Thousand Oaks, CA: SAGE Publications, Inc. Coleman-Martin, M., Heller, K., Cihak, D., Irvine, K. (2005). Using computer-assisted instruction and the nonverbal reading approach to teach word identification. Focus on Autism and Other Developmental Disabilities, 20(2), 80-90. Retrieved February 15, 2010, from EBSCO Host database. Cozby, P. (2009). Methods in behavioral research (10th ed.) New York, NY: McGraw-Hill, Inc. Eom, W. Reiser, R. (2000). The effects of self-regulation and instructional control on performance and motivation in computer-based instruction. International Journal of Instructional Media, 27(3), 247-260. Retrieved February 16, 2010, from EBSCOHost database. Farrell, I. Moore, D. (2000). The effect of navigation tools on learners achievement and attitude in a hypermedia environment. Journal of Educational Technology Systems, 29 (2), 169-181. Retrieved February 16, 2010, from EBSCOHost database. Fuchs, L., Fuchs, D., Hamlet, C., Powell, S., Capizzi, A, Seethaler, P. (2006). The effects of computer-assisted instruction on number combination skill in at-risk first graders, 39(5), 467-475. Retrieved February 15, 2010, from EBSCOHost database. Savage, R., Deault, L., Abrami, P., Hipps, G. (2009). A randomized controlled trial study of the ABRACADABRA reading intervention program in grade 1, Journal of Educational Psychology. 101(3), 590-604. Retrieved February 15, 2010, from EBSCOHost database. Swaak, J. de Jong, T. (2001). Learners vs. system control in using online support for simulation-based discovery learning. Learning Environment Research, 4, 217-241. Retrieved February 16, 2010, from EBSCOHost database. Trochim, W., Donnelly, J. (2008). The research methods knowledge base. Mason, OH: Cengage Learning. Van Gog, T. Ericsson, K. Rikers, R., Paas, F. (2005). Instructional design for advanced learners: Establishing connections between the theoretical framework of cognitive load and deliberate practice. Educational Technology Research and Design, 53(3), 73-81. Retrieved February 16, 2010, from EBSCOHost database. Williams, C., Wright, B. Callaghan, G., Coughlan, B. (2002). Do children with autism learn to read more readily by computer-assisted instruction or traditional book method? A pilot study. Autism: The International Journal of Research and Practice, 6, 71-91.Retrieved February 16, 2010, from EBSCOHost database. Wong, B. (1991). Learning about learning disabilities. New York: Academic Press.

Wednesday, September 4, 2019

Causes Of Mental Health And Bullying In Prison Criminology Essay

Causes Of Mental Health And Bullying In Prison Criminology Essay Prisons as places of deprivation of liberty have existed since time immemorial, yet prisons as we know them today places where offenders are sent by the Criminal Justice System as a punishment for their behaviour -are a product of the industrial age (Maguire et al, 2005). Ideally the reason behind the imprisonment is according to Section 142 of the Criminal Justice Act 2003 (cited in Elliott and Quinn) to punish ,deter and rehabilitate the offender . The main aims of these three areas is concerned with the recognition that the criminal has done something wrong. It then locates them in an institution which by taking away their freedom, is designed to deter them from further offences upon release, punish them for the offence already committed, and then tries to rehabilitate them, so that they are less likely to commit further offences upon release, either because they learn to see the harm they have caused, or because, through education and training, they find other ways to spend thei r time. The process of rehabilitation would change them into law abiding citizens. What is more it is believed that it would persuade other potential criminals that such activates are not beneficial in other words it would deter people from committing further crime ( Elliott and Quinn,2008). While in theory such an idea seems to perfectly fit the purpose of punishment, in practice significant amounts of negative experience such as intensive growth of bullying and mental health problems, are present within the prisons environment, together with overcrowding and poor living conditions, failing to deliver the successful processing of such a plan (Elliot and Quinn, 2008). The aim of this essay is to compare and contrast causes of mental health and bullying in prison, as well as detect any, if possible, links between bullying and mental health among prisoners Farrington defined bullying as the repeated oppression of a less powerful person by a more powerful one. He claimed that it usually includes three different elements. The first element includes physical , verbal or psychological attack with intent to cause harm , fear or distress . The second is an imbalance of power , where a more powerful person is oppressing the less powerful one, and thirdly it includes a continuous series of incidents between these same people over some period of time. Mental health is defined in Section 1(2) of the Mental Health Act 1983 as Mental illness, arrested or in completed development of mind, psychopathic disorder and another disorder or disabilities of mind. Although as shown above there is a huge difference in what constitutes bullying and mental health, there is no doubt that both of them can be caused by similar factors such as social and environmental causes (for example overcrowding) , physical causes and psychological causes(Ireland,2002; WHO, 1998). The physical environment in prisons such as overcrowding, quality of accommodation, availability of contact with friends and family, lack of stimulation in the form of activities , may have an impact on the prisoners mental health as well as contributing to the development of bullying in prison. According to Maguire et al. (à ¢Ã¢â€š ¬Ã‚ ¦) the imprisonment rate in England and Wales is the highest in Western Europe, and according to the official prison statistics for England and Wales the total prison population has increased from around fifty-one thousand in 1995 to over eighty-four thousand in 2009. What is more overcrowding in prisons may lead to increased depression, stress, boredom and nervous breakdown, leading to serious breaches of prison discipline, violence and riots. The cause of prison overcrowding and an increase in the prison population is a result of a greater number of convictions and the absence of the availability of prisons places. Further equally important factors are change in criminal justice policy, tightening of sanctions, resulting in longer prison sentences. Reducing funds for the prison also indirectly cause aggression among prisoners.(though less  staff,   causing  tension  among  overworked  staff, which then affects the inmates). Prisons have a limited capacity, and the prisoners have certain rights that should not be violated. Factors such as lack of liberty, as in many of the prisons where prisoners are locked-up for twenty three hours a day, lack of, or limited, communication with friends and family , usually without any privacy, all contribute to the problem. What is more, prisons take away the prisoners free will. They can no longer freely decided where to live, with whom to associate and how to fill their free time and must follow the discipline imposed by prison rules and prison officers. Physical causes such as their individual characteristics or biological make-up may have some influence on the causes of bulling and mental health in prisons. According to Ireland (2002) prisoners mostly come from social environments where emphasis is placed on toughness and the ability to protect oneself and when entering prison these characteristics are magnified. However such behaviour while being in prison may be linked with bullying other usually weaker and disturbed inmates ( Irleand, 2002) According to Farrington (à ¢Ã¢â€š ¬Ã‚ ¦) the people who tend to bully are more likely to have children who will be bullies, and people who tend to be the victims of bullying tend to have children who will become the victim of bullying. The same may apply to prison inmates who tend to be weak, with low self-esteem and with a low capacity for coping with the prison environment and they are more likely to become victims of bullying than people who are characterized as strong , confident and agg ressive. Also individual genetic make-up might put some prisoners more at risk than others to suffer from mental illness or become victims of bullying because they are less able to adapt or cope with certain environments or they become one of the bullies as they possess the physical skills which give prisoners the ability to bully others physically , verbally or indirectly. Moreover those suffering from any injuries while being in prison, which may have been caused by being involved in a fight with another prisoner, can also experience changes to their personality and in some cases may cause the beginning of schizophrenia, psychosis or self harm. Psychological factors such as a prisoners emotional and mental state of mind , especially when the prisoner has experienced any form of physical or sexual abuse or there have been any other potentially traumatic events in the past can affect his behaviour in prison. While there is a huge proportion of prisoners suffering from such trauma prior to imprisonment, many will experience such trauma as an effect of imprisonment (Crighton and Towl, 2008). Generally prisons are harsh places , where discipline and routine are the essence of daily life causing being in prison to be a stressful experience . Additionally according to (Crighton and Towl, 2008) prisoners appear to be at a high level of risk with factors associated with poor traumatic responses from childhood onwards. . Psychological factors especially emotional responses (Irleand, 2002) in terms of bullying will probably be heightened for the victims . Prisons can be aggressive and threatening environments especially for the first time prisoners . They may be fearful of what may happen to them. Undeniably fear is seen as a necessary component in definitions of bullying in the prison environment. Moreover fear may impact prisoners other emotions such as anxiety, nervousness and feelings of unimportance which may display behaviourally through self harm or social avoidance. Despite the similarities in causes for mental health and bullying in prison we can also see differences . One of them is unquestionable the difference between the definition of mental health and the definition of bullying. Likewise once in prison , prisoners enter a highly structured social environment that negotiates for power and dominance, where dominance over other weaker inmates is one way of gaining acceptance , satisfaction , status and respect among other prisoners. Hence bullying is often seen as a normal part of prison life that helps to gain this dominance over other inmates. Furthermore bullies who remain at the top of the hierarchy among other inmates, through their dominance will often get other prisoners to run errands and do jobs for them which are against prison regime, and so they can remind unidentified and hence will not be punished . While the condition of an individuals mental health consists of a number of different factors and elements. mental health is primar ily our resistance to all of our difficult situations , events, phenomena and our emotional and psychological survival partly depends upon an individuals ability to tolerate the deprivations of prison. Additionally according to Viggiani (2007) most prisoners come from the poorest or most socially excluded tiers of society and often have the greatest health needs. Prison may therefore be the worst place to send them given that, in the main, they are likely to be highly vulnerable or susceptible to poor health, hence mental disorders. Mental disorder may also be the cause of committing the offence, and hence imprisonment. As Rubin (1972:398 cited inà ¢Ã¢â€š ¬Ã‚ ¦) says certain mental disorders are characterized by some kind of confused , bizarre, agitated, threatening, frightened, panicked, paranoid or impulsive behaviours and as a consequence they may lead to inappropriate , anti-social or dangerous acts. Individual mental health may be managed and treated either by medication or di fferent treatment programs (handbook), while in order to prevent bullying prisons should focus on making changes to the prisons environment which would include changing the supervision of the prisoners area, increased security for controlling and monitoring, educating staff and prisoners about bullying, improving communication between prison staff, or even increasing the stimuli for prisoners. This include raising the number and qualities of activities and programs available for prisoners. Undoubtedly, despite the similarities and differences between bullying and mental health, one may lead to the other ( Ireland, 2002; Farrington,à ¢Ã¢â€š ¬Ã‚ ¦.) . As mentioned above bullying constitutes aggressive behaviour in which an individual manipulates and dominates others in order to obtain a goal, whether it is social or material. In order to classify the behaviour as bullying it must represent repeated and unprovoked acts of aggression , which include physical , verbal or psychological attack (Irleand,2002; Farrington, à ¢Ã¢â€š ¬Ã‚ ¦.). Indeed bulling can cause immediate harm and distress to victims and have negative consequences on their mental health. Victims may feel psychologically or physically distressed and experience pain, and prisoners who have been the victims of bullying may experience a range of feelings such as anger, fear, anxiety ,paranoia , distress, hopelessness or depression (Ireland,2002) which can lead to avoidance, social isolation and therefore mental illness in prisoners. In conclusion despite the idea that prisons should rehabilitate and change offenders into law abiding citizens, we can see that prison is a modern form of slavery no matter what its ideological justification is. Prisoners mental health and bullying is a growing problem in prisons . Instead of rehabilitating and changing prisoners into well managed and well behaved citizens, in many cases it changes them into more aggressive and troublesome inhabitants very often with physical and mental problems, which makes it harder for them to reintegrate with the society and with present times.

Tuesday, September 3, 2019

Starting Philosophic Problem :: Philosophy Philosophical Papers

Starting Philosophic Problem ABSTRACT: The starting philosophic problem is related to the categories ‘being’ and ‘nonbeing.’ This is the problem of the relationship between being and nonbeing. The cardinal question of philosophy is: ‘What can be considered to be primary, being or nonbeing?’ In the history of philosophy, it is possible to speak about two basic philosophic paradigms: philosophy of being and philosophy of nonbeing. This paper is an elaboration of the ‘philosophy of nonbeing.’ One of the most fundamental problems of philosophy is related with the most meaningful philosophic notions, that is, with the categories of "being" and "non-being". The notion "being" is the philosopohic notion that denotes: 1) something that is existing, 2) the totality of really existing things, the existing reality. "Non-being" is the other philosophic notion that denotes: 1) absence of something, 2) all things non-existent in reality, non-existent reality. The form of manifestation for being is "something" and the non-being manifests itself in the form of "nothing". So, according to the author, the most fundamental philosophic problem is the problem of the relationship between the being and the non-being, it is the problem of relationship between these two categories, "being" and "non-being". In the first line, this problem brings up the question about the existence of any real things existing in the real world: things that were existed, exist, and will exist; also put forward is the question about the existence of the world as a whole. In the final account, it is a matter of the problem of existence as such. The German philosopher and mathematician Gottfried Wilhelm Leibniz (XVII-th century) attacked this problem in the following way: he states that the first and cardinal question must be expressed in the form: Why there exists "something", but not "nothing"? A similar thought was expressed later by the German philosophers Friedrich Schelling (XIX-th century) and Martin Heidegger (XX-th century). The problem of the relationship between being and non-being turns to be the starting philosophic problem, inasmuch as all other philosophic problems and questions are meaningful in cases when it is necessary to solve this problem that deals with the matter of principle, more specifically, the existence of things, phenomena, world on the whole, object and subject of cognition. The very solution of the problem of relationship between the being and the non-being is the basic and key solution for a number of philosophic problems such as: world origin, world space-time structure formation, causes and mechanisms of motion and development, build-up and destruction of objective forms, human being life and death, meaning of human being existence, mankind survival, and others.

Recruitment and Retention in Speech -- Language

Addressing the Significant Shortage in the Profession Speech-language pathologists (SLPs) are in high demand throughout the United States. The U.S. Department of Labor’s Bureau of Labor Statistics (BLS) projects that the United States will need â€Å"about 141, 400 SLPs through the year 2018 to meet the increasing need in the profession and to replace retiring SLPs† (2011, p. 2). The demand for qualified professional in the field continues to rise from year to year. According to the BLS Occupational Outlook Handbook, 2011-2012 Edition, â€Å"employment is expected to grow 19% in the profession in the next decade† (p. 2). A report released in 2008 by the American Association for Employment in Education (AAEE) reported â€Å"SLPs are ranked 14th in the nation for fields with a considerable vacancy as related to other areas in education† (p. 8). In the state of Nebraska, the U.S. Department of Education listed speech language pathology as a â€Å"significant teacher shortage area† (2011, p. 58). Recruiting and retaining qualified professionals has impacted school districts across the nation. The frustrations of many SLPs are similar: job dissatisfaction, lack of sufficient compensation, and oversized workloads contribute to the professional shortage. Research suggests that â€Å"lack of recognition, few opportunities for promotion, excessive paperwork, loss of autonomy, lack of supplies, low pay, and stressful interpersonal interactions all contributed to teachers’ decisions to leave the schools† (Blood, Ridenour, Thomas, Qualls, & Hammer, 2002, p. 283). Job satisfaction â€Å"is the terminology used to describe whether employees are happy and contented and fulfilling their desires and needs at work† (Heathfield, n.d., para. 1). Many SLPs struggle to... ...d, S. (n.d.) Employee satisfaction. Retrieved on November 26, 2011 from http://humanresources.about.com/od/employeesurvey1/g/employee_satisfy.htm. Palacio, M. (2001). Successful strategies for addressing caseload issues. Advance for Speech-Language Pathologists & Audiologists, February 2001. Retrieved from http://speech-language-pathology-audiology.advanceweb.com/Article/Successful-Strategies-for-Addressing-Caseload-Issues.aspx. â€Å"Psychosocial support†. (n.d.). Retrieved on November 27, 2011 from http://www.ovcsupport.net/s/index.php?i=59. U.S. Department of Education. (2011). Teacher shortage area nationwide list. Retrieved on November 26, 2011 from http://www2.ed.gov/about/offices/list/ope/pol/tsa.pdf. U.S. Department of Labor (2011). Occupational outlook handbook. Retrieved on November 22, 2011 from http://www.bls.gov/oco/pdf/ocos099.pdf .

Monday, September 2, 2019

Art History Final

They have manipulated our opinion, reactions, and even likeness of art. They defined who the great artists are and through their judgments they have even cited the value of art. But unfortunately for them, post-modern art has dethroned critics with the use of humor, wit, and scale of impact in their art. Post-modern art rejects the idea Of beauty and truth and reveals the value Of irony. Artists such as Marcel Decamp, who created the Fountain, or Mark Tansy, shock, mock, and force the viewers to rethink the meaning of art. The reader/viewer must create a whole new context in which to hold the art, one which may truly challenge his belief structures, one which may force him, to make sense of what he is seeing, to hold a larger perspective than he errantly has in place. † 1 And this applies to the critic as well. His opinion can no longer be valued as before because this kind of art no longer has a meaning and its interpretation no longer matters. Its importance lies on the impac t and sensation of its viewers. Art becomes then a participatory experience, one in which the audience receives, and handles as they may, the flows of libidinal energies which the artist set free. † 2 The control the words Of critics had over art is gone and viewers are able to let their unconscious decide what art is. Nothing can better explain the place of the critic with this ewe art as Roland Breather's essay title does: post-modern art has brought â€Å"The Death of the Author. † In his essay Farther explains how in literature the identity of the author no longer has any importance. Nonperformance† may be admired, but not his â€Å"genius† The author. 3 By giving the power to the literature rather than to the writer itself, he is giving the power to the piece of art and not to the critic as it has always been. As explained earlier, the opinion of the critic was impeding us from reaching our own conclusions on art. But by denying beauty in art and intro ducing something as absurd as a urinal, post-modern artists â€Å"refused to assign [art] a â€Å"secret† that is, an ultimate meaning,†4 that a critic can easily identify or criticize, and instead, â€Å"liberates an activity† where each viewer can have their own reflections on the piece.In my essay I am giving the role of the author in Farther essay, to both the critic and the artist. Nevertheless, I am assigning the part of the modern author to the artist, and its opposite to the critic. Before, the importance was given to the author, he was recognized, in other words, the critic was recognized. But now, â€Å"language knows a subject, not a person. 5 And from my point of view I interpret this statement as meaning that the person, in other words the critic, does not matter anymore, the art does, the subject.Of course the critic will still be a critic and give their opinion, rank a piece of art, and judges it as well. But this time they cannot use an absolute standard of arbitration. By not being able to judge the way they used to, they assert Farther point, that ‘the explanation of the work is always sought in the man who has produced and for me this man he speaks about could only be the artist himself. Clement Greenberg, Harold Rosenberg, and Roseland Krause have been incredibly influential in the history of art. Greenberg championed and was the first to appreciate the achievements of abstract art.Rosenberg was also a supporter of the abstract expressionists and proved the importance of the happenings and performance art. Krause introduced a new approach that focused on aesthetics that apprehend cultural and historical issues. While I have criticized them in my essay shall also embrace their intellectual knowledge on the subject of art and its importance in society as well as history. Nevertheless, â€Å"the birth of the reader must be ransomed by the death of the author. 7 The public should continue to take in and learn from t hese figures opinions. Nevertheless, we cannot take what they say too literal.We must understand that they are critics, they are â€Å"a person who judges the merits of literary, artistic, or musical work. â€Å"8 They judge but they do not define art. Challenges to the Status Quo Art has deliberately hidden the figure of women and their work in society. There have been great women artists, but have not been recognized as such and valued by posterity. Many paintings by women were initially credited to males, suggesting that there is no objective difference between art made by omen or men, but when it is verified that the author is a woman, the economic and symbolic value of the work decreases immensely.Even today, there are works by women that are not attributed to the real author because the fact that they are women would reduce the price of the work considerably. As Linda Gnocchi explains in her essay, ‘Why Have There Been no Great Women Artists,† the answer to this question â€Å"lies not in the nature of individual genius or the lack of it, but in the nature of given social institutions and what they forbid or encourage in various classes or groups of individuals. Women have a long experience in the fields of art and culture, their contributions have always been present, although in many cases the concept of â€Å"respect† has not been applied to them in the same way as their male counterparts. They have always been relegated to a second plane. Being a woman and artist has often been seen as an injurious occupation and inconsistent, while it has been traditionally reserved the epithet of genius for men. Women have to live in a society which has not ceased to be sexist, in a culture where women are still thought of as an inferior place and lacking retain rights.And this, as Gnocchi explains, does not apply to art only. In her article she gives us the example of the great artist, Rosa Bonjour. Now a day if women become the CEO of a comp any, an architect, or a policeman, they would be categorized the same way Bonjour was: a tomboy, a woman with a desire to be more masculine, or selfish. Yet if men â€Å"have a need for feminine involvement,† 10 as Gnocchi puts it, the jobs such as pediatricians, child psychologists, or chef, are admired rather than frowned upon. In her essay Gnocchi explains the disadvantages women had in art education that led to he lack of great women artists.Some examples were the restriction put on them to participate in classes with nude models or be a part of several contests. Nevertheless, today those restrictions no longer apply but the lack of ‘great women' still persists. Society and history is to blame for this. Now, as John Stuart Mill points out and Gnocchi quotes in her essay, â€Å"everything which is usual appears natural. The subjection of women to men being a universal custom, any departure from it quite naturally appears unnatural. † 1 1 We have progressed as a society and we have reached equality in many areas.However, sexism as well as racism seems it will never cease to exist because they are distinctions we consider natural. In her article Gnocchi writes about how her question can or has been answered incorrectly. Afraid to be included in the category of incorrect answers, I would like to put my life as a perspective instead and show how the views of today's society regarding the sexes are clearly defined. From a very young age had a nanny, who as many would expect was a women because caring for children, cooking, and cleaning is a role usually given to a women if in a household.A man drove me to school every morning and generally anyone who drove that was not a family member was in fact usually a man. I remember the habitual comment that ‘women do not know how to drive. ‘ When I arrived to school there were five male security guards, and my teachers all the way from pre-kinder to about sixth grade were women. Society wou ld see this as correct because security guards are there to protect and men being stronger than women means they can do a better job.And the reason why all my teachers at a young age were women is because we are still young, I do not receive a grade but simply mille faces, stickers, or a ‘good job' in its place, and I need a mother figure at all times. High school was not much different. I started to get grades and was considered a grown-up, so men began being my teachers as well. Physical education, however, was still separated by sex, including the teacher, because â€Å"boys are more aggressive and they can hurt girls. † Now I arrive at Washington and Lee University.An Ivy League education in a beautiful campus with amazing professor, but, a place where it is believed that women only come here to get their MRS. degree. A joke that has been around since he university became co-educational back in the ass's, saying that women only come here to look for a husband. At th is point Gnocchi will probably consider me a feminist, but I am simply showing a perspective from someone that is in her twenties in the 21 SST century and can still clearly separate the roles of men and women as expected in the realm of our society that we claim has improved and changed.My life is only one perspective and many might not have had the same experience did, but it does support what Gnocchi repeatedly states in her essay. Quote Incision's words once more: the question of women's equality-?in art as in any other realm-?devolves not upon the relative benevolence or ill-will of individual men, nor the self- confidence or abjectness of individual women, but rather on the very nature of our institutional structures themselves and the view of reality which they impose on the human beings who are part of them. 12 This also includes the educational system today. Gnocchi makes one more important argument in her article. She explains that when it comes to art what needs to change is the way its history is taught. Lucy R. Leopard supports this argument in her article, Too Political? Forget It,† when lists the amount of information on art that has most times not been taught, and how it IS â€Å"No wonder activist and community art, always a stepchild, is slow to evolve. 13 The statement that ‘there have been no great women artists' can be justified, but it does not mean it is correct. Women as well as other minorities have been deprived from being a ‘genius', a term that is unreal but largely used for men, due to their social conditions and deprivation of an education. But the only way to transform this lack of recognition is to stop listing excuses, or have minorities keep aerating themselves as such and change the unnatural to natural in society. Artistic expression comes from the spirit, not the body type you have or hormones. The language of art is, more materially, embodied in paint and line on canvas or paper, in stone or clay or plas tic or metal-it is neither a sob story nor a confidential whisper. â€Å"14 The Courage to Break Grounds For many years there have been many instances where artists have held public events to raise social and political issues, yet many of which are not on record. While artists know that when choosing this career path it will not be ass, especially economically, they risk their commodities for their passion. Nevertheless, this does not mean that they do not want recognition. If they are primarily concerned with audiences who will never write, curate, collect or fund art, they run the risk of being forgotten before they are even acknowledged . â€Å"15 A reason why political artists mostly limit their work to galleries, and this is a problem that must be fixed. However, I do not believe that political artists who only care about this acknowledgement truly care about making political art. In galleries the artwork will always first be seen as esthetics and subject to be rated and crit icized by its artistic aspects rather than the subject matter and message it is trying to pass on.Political art is that which addresses public concern and takes a stand on an issue. It is a way to speak for those who wont and to open the eyes of those who cannot or resist viewing reality. It is also meant to support or represent those that cannot do it on their own. Most importantly it is supposed to change minds. Political art is not meant to be hidden by the walls of galleries and museums and constrained to the eyes of critics and elitists. It is meant for society to see as ell as to learn and experience what is being fought for Or sometimes encouraged.Nevertheless, politics is a sensitive subject. While I do believe it should be out for everyone to view, certain aspects of the viewer can affect the intended message of the artist, making it difficult to completely object the idea that such an important subject matter should have viewers with certain capacities of understanding. Th e real answer as to whether or not political art should be presented in public venues, even if it is protected by the first amendment to do so, lies on how it might impact the observers.

Sunday, September 1, 2019

Solution Manual for Fluid Mech Cengel Book

Chapter 6 Momentum Analysis of Flow Systems Chapter 6 MOMENTUM ANALYSIS OF FLOW SYSTEMS Newton’s Laws and Conservation of Momentum 6-1C Newton’s first law states that â€Å"a body at rest remains at rest, and a body in motion remains in motion at the same velocity in a straight path when the net force acting on it is zero. † Therefore, a body tends to preserve its state or inertia. Newton’s second law states that â€Å"the acceleration of a body is proportional to the net force acting on it and is inversely proportional to its mass. Newton’s third law states â€Å"when a body exerts a force on a second body, the second body exerts an equal and opposite force on the first. † r 6-2C Since momentum ( mV ) is the product of a vector (velocity) and a scalar (mass), momentum must be a vector that points in the same direction as the velocity vector. 6-3C The conservation of momentum principle is expressed as â€Å"the momentum of a system remains constant when the net force acting on it is zero, and thus the momentum of such systems is conserved†.The momentum of a body remains constant if the net force acting on it is zero. 6-4C Newton’s second law of motion, also called the angular momentum equation, is expressed as â€Å"the rate of change of the angular momentum of a body is equal to the net torque acting it. † For a non-rigid body with zero net torque, the angular momentum remains constant, but the angular velocity changes in accordance with I? = constant where I is the moment of inertia of the body. 6-5C No.Two rigid bodies having the same mass and angular speed will have different angular momentums unless they also have the same moment of inertia I. Linear Momentum Equation 6-6C The relationship between the time rates of change of an extensive property for a system and for a control volume is expressed by the Reynolds transport theorem, which provides the link between the r system and control volume concepts. The linear momentum equation is obtained by setting b = V and thus r B = mV in the Reynolds transport theorem. -7C The forces acting on the control volume consist of body forces that act throughout the entire body of the control volume (such as gravity, electric, and magnetic forces) and surface forces that act on the control surface (such as the pressure forces and reaction forces at points of contact). The net force acting on a control volume is the sum of all body and surface forces. Fluid weight is a body force, and pressure is a surface force (acting per unit area). -8C All of these surface forces arise as the control volume is isolated from its surroundings for analysis, and the effect of any detached object is accounted for by a force at that location. We can minimize the number of surface forces exposed by choosing the control volume such that the forces that we are not interested in remain internal, and thus they do not complicate the analysis. A well-chosen cont rol volume exposes only the forces that are to be determined (such as reaction forces) and a minimum number of other forces. 6-9C The momentum-flux correction factor ? nables us to express the momentum flux in terms of the r r r r & ? V (V ? n )dAc = ? mV avg . The value of ? is unity for uniform mass flow rate and mean flow velocity as ? Ac flow, such as a jet flow, nearly unity for turbulent flow (between 1. 01 and 1. 04), but about 1. 3 for laminar flow. So it should be considered in laminar flow. 6-1 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission.Chapter 6 Momentum Analysis of Flow Systems 6-10C The momentum equation for steady one-dimensional flow for the case of no external forces is r r r & & F= ? mV ? ? mV ? ? out ? in where the left hand side is the net force acting on the control volume, and first term on the right hand side is the incoming momentum flux and the second term is the outgoing momentum flux by mass. 6-11C In the application of the momentum equation, we can disregard the atmospheric pressure and work with gage pressures only since the atmospheric pressure acts in all directions, and its effect cancels out in every direction. -12C The fireman who holds the hose backwards so that the water makes a U-turn before being discharged will experience a greater reaction force since the numerical values of momentum fluxes across the nozzle are added in this case instead of being subtracted. 6-13C No, V is not the upper limit to the rocket’s ultimate velocity. Without friction the rocket velocity will continue to increase as more gas outlets the nozzle. 6-14C A helicopter hovers because the strong downdraft of air, caused by the overhead propeller blades, manifests a momentum in the air stream.This momentum must be countered by the helicopter lift force. 6-15C As the air density decreases, it requires more energy for a helicopter to hover, because more air must be forced into the downdraft by the helicopter blades to provide the same lift force. Therefore, it takes more power for a helicopter to hover on the top of a high mountain than it does at sea level. 6-16C In winter the air is generally colder, and thus denser. Therefore, less air must be driven by the blades to provide the same helicopter lift, requiring less power. 6-2 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc.Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-17C The force required to hold the plate against the horizontal water stream will increase by a factor of 4 when the velocity is doubled since & F = mV = ( ? AV )V = ? AV 2 and thus the force is proportional to the square of the velocity. 6-18C The accele ration will not be constant since the force is not constant. The impulse force exerted by & water on the plate is F = mV = ( ? AV )V = ?AV 2 , where V is the relative velocity between the water and the plate, which is moving. The plate acceleration will be a = F/m. But as the plate begins to move, V decreases, so the acceleration must also decrease. 6-19C The maximum velocity possible for the plate is the velocity of the water jet. As long as the plate is moving slower than the jet, the water will exert a force on the plate, which will cause it to accelerate, until terminal jet velocity is reached. 6-20 It is to be shown that the force exerted by a liquid jet of velocity V on a stationary nozzle is & proportional to V2, or alternatively, to m 2 . Assumptions 1 The flow is steady and incompressible. 2 The nozzle is given to be stationary. 3 The nozzle involves a 90 ° turn and thus the incoming and outgoing flow streams are normal to each other. 4 The water is discharged to the atmo sphere, and thus the gage pressure at the outlet is zero. Analysis We take the nozzle as the control volume, and the flow direction at the outlet as the x axis. Note that the nozzle makes a 90 ° turn, and thus it does not contribute to any pressure force or momentum flux & term at the inlet in the x direction. Noting that m = ?AV where A is the nozzle outlet area and V is the average nozzle outlet velocity, the momentum equation for steady one-dimensional flow in the x direction reduces to r r r & & & & F= ? mV ? ? mV > FRx = ? m out V out = ? mV ? ? out ? in where FRx is the reaction force on the nozzle due to liquid jet at the nozzle outlet. Then, & m = ? AV & > FRx = ? mV = AVV = AV 2 & & or FRx = ? mV = ? m & & m m2 =? ?A ? A Therefore, the force exerted by a liquid jet of velocity V on this & stationary nozzle is proportional to V2, or alternatively, to m 2 . Liquid Nozzle V FR 6-3 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc.Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-21 A water jet of velocity V impinges on a plate moving toward the water jet with velocity ? V. The force required to move the plate towards the jet is to be determined in terms of F acting on the stationary plate. Assumptions 1 The flow is steady and incompressible. 2 The plate is vertical and the jet is normal to plate. 3 The pressure on both sides of the plate is atmospheric pressure (and thus its effect cancels out). Fiction during motion is negligible. 5 There is no acceleration of the plate. 6 The water splashes off the sides of the plate in a plane normal to the jet. 6 Jet flow is nearly uniform and thus the effect of the momentum-flux correction factor is negligible, ? ? 1. Analysis We take the plate as the control volume. The relative velocity between the plate and the jet is V when the plate is st ationary, and 1. 5V when the plate is moving with a velocity ? V towards the plate. Then the momentum equation for steady one-dimensional flow in the horizontal direction reduces to r r r & & & & F= ? mV ? ? mV > ? FR = ? mi Vi > FR = miVi ? out ? in Stationary plate: ( Vi = V and Moving plate: ( Vi = 1. 5V and & mi = ? AVi = ? AV ) > FR = ? AV 2 = F & mi = ? AVi = ? A(1. 5V ) ) > FR = ? A(1. 5V ) 2 = 2. 25 ? AV 2 = 2. 25 F Therefore, the force required to hold the plate stationary against the oncoming water jet becomes 2. 25 times when the jet velocity becomes 1. 5 times. Discussion Note that when the plate is stationary, V is also the jet velocity. But if the plate moves toward the stream with velocity ? V, then the relative velocity is 1. 5V, and the amount of mass striking the plate (and falling off its sides) per unit time also increases by 50%. 1/2V VWaterjet 6-4 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-22 A 90 ° elbow deflects water upwards and discharges it to the atmosphere at a specified rate. The gage pressure at the inlet of the elbow and the anchoring force needed to hold the elbow in place are to be determined. v Assumptions 1 The flow is steady, frictionless, incompressible, and irrotational (so that the Bernoulli equation is applicable). The weight of the elbow and the water in it is negligible. 3 The water is discharged to the atmosphere, and thus the gage pressure at the outlet is zero. 4 The momentum-flux correction factor for each inlet and outlet is given to be ? = 1. 03. Properties We take the density of water to be 1000 kg/m3. Analysis (a) We take the elbow as the control volume, and designate the entrance by 1 and the outlet by 2. We also designate the horizontal coordinate by x (with the direction of flow as being the positive direction) and the vertical coordinate by z.The continuity equation for this one-inlet one-outlet steady flow system is & & & & m1 = m 2 = m = 30 kg/s. Noting that m = ? AV , the mean inlet and outlet velocities of water are & & 25 kg/s m m = = = 3. 18 m/s 2 ? A ? (? D / 4) (1000 kg/m 3 )[? (0. 1 m) 2 / 4] Noting that V1 = V2 and P2 = Patm, the Bernoulli equation for a streamline going through the center of the reducing elbow is expressed as V1 = V 2 = V = P V12 P V2 1 + + z1 = 2 + 2 + z2 > P ? P2 = ? g ( z2 ? z1 ) > P , gage = ? g ( z2 ? z1 ) 1 1 ? g 2 g ? g 2 g Substituting, ? ? 1 kN 2 ? P , gage = (1000 kg/m3 )(9. 81 m/s 2 )(0. 35 m)? 1 ? 1000 kg ? /s2 ? = 3. 434 kN/m = 3. 434 kPa ? ? r r r & & (b) The momentum equation for steady one-dimensional flow is F= ? mV ? ? mV . We let the x- ? ? out ? in and z- components of the anchoring force of the elbow be FRx and FRz, and assume them to be in the positive directions. We also use gage pressures to avoid dealing with the atmospheric pressure which acts on all surfaces. Then the momentum equations along the x and y axes become & & FRx + P1,gage A1 = 0 ? ?m(+V1 ) = ? ?mV & & FRz = ? m(+V 2 ) = ? mV z x FRz 2 35 cm Solving for FRx and FRz, and substituting the given values, & FRx = ? ?mV ? P1, gage A1 ? N = ? 1. 03(25 kg/s)(3. 18 m/s)? ? 1 kg ? m/s 2 ? = ? 109 N ? ? ? (3434 N/m 2 )[? (0. 1 m) 2 / 4] ? ? ? ? = 81. 9 N ? ? FRy FRx = tan -1 Water 25 kg/s FRx 1 ? 1N & FRy = ? mV = 1. 03(25 kg/s)(3. 18 m/s)? ? 1 kg ? m/s 2 ? and 2 2 FR = FRx + FRy = (? 109) 2 + 81. 9 2 = 136 N, ? = tan -1 81. 9 = ? 37 ° = 143 ° ? 109 Discussion Note that the magnitude of the anchoring force is 136 N, and its line of action makes 143 ° from the positive x direction. Also, a negative value for FRx indicates the assumed direction is wrong, and should be reversed. 6-5 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc.Limited distribution permitted only to teachers and educators for course preparatio n. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-23 An 180 ° elbow forces the flow to make a U-turn and discharges it to the atmosphere at a specified rate. The gage pressure at the inlet of the elbow and the anchoring force needed to hold the elbow in place are to be determined. v Assumptions 1 The flow is steady, frictionless, one-dimensional, incompressible, and irrotational (so that the Bernoulli equation is applicable). The weight of the elbow and the water in it is negligible. 3 The water is discharged to the atmosphere, and thus the gage pressure at the outlet is zero. 4 The momentumflux correction factor for each inlet and outlet is given to be ? = 1. 03. Properties We take the density of water to be 1000 kg/m3. Analysis (a) We take the elbow as the control volume, and designate the entrance by 1 and the outlet by 2. We also designate the horizontal coordinate by x (with the direction of flow as b eing the positive direction) and the vertical coordinate by z.The continuity equation for this one-inlet one-outlet steady flow system is & & & & m1 = m 2 = m = 30 kg/s. Noting that m = ? AV , the mean inlet and outlet velocities of water are & & 25 kg/s m m = = = 3. 18 m/s 2 ? A ? (? D / 4) (1000 kg/m 3 )[? (0. 1 m) 2 / 4] Noting that V1 = V2 and P2 = Patm, the Bernoulli equation for a streamline going through the center of the reducing elbow is expressed as V1 = V 2 = V = P V12 P V2 1 + + z1 = 2 + 2 + z2 > P ? P2 = ? g ( z2 ? z1 ) > P , gage = ? g ( z2 ? z1 ) 1 1 ? g 2 g ? g 2 g Substituting, ? ? 1 kN 2 ? P , gage = (1000 kg/m3 )(9. 81 m/s2 )(0. 70 m)? 1 ? 1000 kg ? m/s2 ? 6. 867 kN/m = 6. 867 kPa ? ? r r r & & (b) The momentum equation for steady one-dimensional flow is F= ? mV ? ? mV . We let the x- ? ? out ? in and z- components of the anchoring force of the elbow be FRx and FRz, and assume them to be in the positive directions. We also use gage pressures to avoid dealing with the atmospheric pressure which acts on all surfaces. Then the momentum equations along the x and z axes become & & & FRx + P1,gage A1 = ? m(? V 2 ) ? ? m(+V1 ) = ? 2 ? mV FRz = 0 Solving for FRx and substituting the given values, & FRx = ? 2 ? mV ? P1, gage A1 ? 1N = ? 2 ? 1. 03(25 kg/s)(3. 18 m/s)? 1 kg ? m/s 2 ? = ? 218 N ? ? ? (6867 N/m 2 )[? (0. 1 m) 2 / 4] ? ? 2 z x FRz Water 25 kg/s 35 cm and FR = FRx = – 218 N since the y-component of the anchoring force is zero. Therefore, the anchoring force has a magnitude of 218 N and it acts in the negative x direction. Discussion Note that a negative value for FRx indicates the assumed direction is wrong, and should be reversed. FRx 1 6-6 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission.Chapter 6 Momentum Analysis of Flow Systems 6-24E A horizontal water j et strikes a vertical stationary plate normally at a specified velocity. For a given anchoring force needed to hold the plate in place, the flow rate of water is to be determined. Assumptions 1 The flow is steady and incompressible. 2 The water splatters off the sides of the plate in a plane normal to the jet. 3 The water jet is exposed to the atmosphere, and thus the pressure of the water jet and the splattered water is the atmospheric pressure which is disregarded since it acts on the entire control surface. The vertical forces and momentum fluxes are not considered since they have no effect on the horizontal reaction force. 5 Jet flow is nearly uniform and thus the effect of the momentum-flux correction factor is negligible, ? ? 1. Properties We take the density of water to be 62. 4 lbm/ft3. Analysis We take the plate as the control volume such that it contains the entire plate and cuts through the water jet and the support bar normally, and the direction of flow as the positive direction of x axis. The momentum equation for steady one-dimensional flow in the x (flow) direction reduces in this case o r r r & & & & F= ? mV ? ? mV > ? FRx = ? mV1 > FR = mV1 ? ? out ? in We note that the reaction force acts in the opposite direction to flow, and we should not forget the negative & sign for forces and velocities in the negative x-direction. Solving for m and substituting the given values, & m= FRx 350 lbf = V1 30 ft/s ? 32. 2 lbm ? ft/s 2 ? ? 1 lbf ? ? ? = 376 lbm/s ? ? Then the volume flow rate becomes V& = & m ? = 376 lbm/s 62. 4 lbm/ft 3 = 6. 02 ft 3 /s Therefore, the volume flow rate of water under stated assumptions must be 6. 02 ft3/s.Discussion In reality, some water will be scattered back, and this will add to the reaction force of water. The flow rate in that case will be less. m 1 FRx = 350 lbf Waterjet 6-7 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparati on. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-25 A reducing elbow deflects water upwards and discharges it to the atmosphere at a specified rate.The anchoring force needed to hold the elbow in place is to be determined. v Assumptions 1 The flow is steady, frictionless, one-dimensional, incompressible, and irrotational (so that the Bernoulli equation is applicable). 2 The weight of the elbow and the water in it is considered. 3 The water is discharged to the atmosphere, and thus the gage pressure at the outlet is zero. 4 The momentumflux correction factor for each inlet and outlet is given to be ? = 1. 03. Properties We take the density of water to be 1000 kg/m3. Analysis The weight of the elbow and the water in it is W = mg = (50 kg)(9. 1 m/s 2 ) = 490. 5 N = 0. 4905 kN We take the elbow as the control volume, and designate the entrance by 1 and the outlet by 2. We also designate the horizontal coordina te by x (with the direction of flow as being the positive direction) and the vertical coordinate by z. The continuity equation for this one-inlet one-outlet steady flow system is & & & & m1 = m 2 = m = 30 kg/s. Noting that m = ? AV , the inlet and outlet velocities of water are & 30 kg/s m V1 = = = 2. 0 m/s ? A1 (1000 kg/m 3 )(0. 0150 m 2 ) & 30 kg/s m V2 = = = 12 m/s ? A2 (1000 kg/m 3 )(0. 025 m 2 ) Taking the center of the inlet cross section as the reference level (z1 = 0) and noting that P2 = Patm, the Bernoulli equation for a streamline going through the center of the reducing elbow is expressed as ? V 2 ? V12 ? ? V22 ? V12 ? P V12 P V2 1 ? ? ? + + z1 = 2 + 2 + z2 > P ? P2 = ? g ? 2 1 1 ? 2 g + z2 ? z1 ? > P , gage = ? g ? 2 g + z2 ? ?g 2 g ? g 2 g ? ? ? ? Substituting, ? (12 m/s) 2 ? (2 m/s) 2 ? 1 kN ? = 73. 9 kN/m 2 = 73. 9 kPa P , gage = (1000 kg/m3 )(9. 81 m/s 2 )? + 0. 4 1 2 ? 1000 kg ? m/s 2 ? 2(9. 81 m/s ) ? ? The momentum equation for steady one-dimensional flow is & & ? F = ? mV ? ? ? mV . We let the x- and out in r r r z- components of the anchoring force of the elbow be FRx and FRz, and assume them to be in the positive directions. We also use gage pressures to avoid dealing with the atmospheric pressure which acts on all surfaces. Then the momentum equations along the x and z axes become & & & FRx + P1,gage A1 = ? mV 2 cos ? ? ? mV1 and FRz ? W = ? mV 2 sin ? 2 25 cm2 Solving for FRx and FRz, and substituting the given values, & FRx = ? m(V 2 cos ? ? V1 ) ? P1, gage A1 ? 1 kN = 1. 03(30 kg/s)[(12cos45 ° – 2) m/s]? ? 1000 kg ? m/s 2 ? ? (73. 9 kN/m 2 )(0. 0150 m 2 ) = ? 0. 908 kN ? ? ? Water 30 kg/s 45 ° FRz FRx 150 m2 W 1 ? ? 1 kN ? & FRz = ? mV 2 sin ? + W = 1. 03(30 kg/s)(12sin45 ° m/s)? ? 1000 kg ? m/s 2 ? + 0. 4905 kN = 0. 753 kN ? ? 0. 753 2 2 2 2 -1 FRz FR = FRx + FRz = (? 0. 908) + (0. 753) = 1. 18 kN, ? = tan = tan -1 = ? 39. 7 ° FRx ? 0. 908 Discussion Note that the magnitude of the anchoring force is 1. 18 kN, and its line of action makes –39. 7 ° from +x direction. Negative value for FRx indicates the assumed direction is wrong. 6-8 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation.If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-26 A reducing elbow deflects water upwards and discharges it to the atmosphere at a specified rate. The anchoring force needed to hold the elbow in place is to be determined. v Assumptions 1 The flow is steady, frictionless, one-dimensional, incompressible, and irrotational (so that the Bernoulli equation is applicable). 2 The weight of the elbow and the water in it is considered. 3 The water is discharged to the atmosphere, and thus the gage pressure at the outlet is zero. The momentumflux correction factor for each inlet and outlet is given to be ? = 1. 03. Properties We take the densi ty of water to be 1000 kg/m3. Analysis The weight of the elbow and the water in it is W = mg = (50 kg)(9. 81 m/s 2 ) = 490. 5 N = 0. 4905 kN We take the elbow as the control volume, and designate the entrance by 1 and the outlet by 2. We also designate the horizontal coordinate by x (with the direction of flow as being the positive direction) and the vertical coordinate by z. The continuity equation for this one-inlet one-outlet steady flow system is & & & & m1 = m 2 = m = 30 kg/s. Noting that m = ?AV , the inlet and outlet velocities of water are & 30 kg/s m = = 2. 0 m/s V1 = ? A1 (1000 kg/m 3 )(0. 0150 m 2 ) & 30 kg/s m V2 = = = 12 m/s ? A2 (1000 kg/m 3 )(0. 0025 m 2 ) Taking the center of the inlet cross section as the reference level (z1 = 0) and noting that P2 = Patm, the Bernoulli equation for a streamline going through the center of the reducing elbow is expressed as ? V 2 ? V12 ? ? V22 ? V12 ? P V12 P V2 1 ? ? ? + + z1 = 2 + 2 + z2 > P ? P2 = ? g ? 2 1 1 ? 2 g + z2 ? z1 ? > P , gage = ? g ? 2 g + z2 ? ?g 2 g ? g 2 g ? ? ? ? or, P , gage = (1000 kg/m3 )(9. 81 m/s2 )? 1 ? ? ? (12 m/s)2 ? (2 m/s)2 2(9. 81 m/s ) ? 1 kN ? = 73. 9 kN/m 2 = 73. 9 kPa + 0. 4 1000 kg ? m/s 2 ? ? The momentum equation for steady one-dimensional flow is & & ? F = ? ?mV ? ? ? mV . We let the xout in r r r and y- components of the anchoring force of the elbow be FRx and FRz, and assume them to be in the positive directions. We also use gage pressures to avoid dealing with the atmospheric pressure which acts on all surfaces. Then the momentum equations along the x and z axes become & & FRx + P1,gage A1 = ? mV 2 cos ? ? ? mV1 and & FRy ? W = ? mV 2 sin ? Solving for FRx and FRz, and substituting the given values, & FRx = ? m(V 2 cos ? V1 ) ? P1, gage A1 ? 1 kN = 1. 03(30 kg/s)[(12cos110 ° – 2) m/s]? ? 1000 kg ? m/s 2 ? FRz ? ? ? (73. 9 kN/m 2 )(0. 0150 m 2 ) = ? 1. 297 kN ? ? ? ? 1 kN ? + 0. 4905 kN = 0. 8389 kN & = ? mV 2 sin ? + W = 1. 03(30 kg/s)(12sin110 ° m/s)? 2 ? ? 1000 kg ? m/s ? ? 2 25 cm2 110 ° 2 2 FR = FRx + FRz = (? 1. 297) 2 + 0. 8389 2 = 1. 54 kN and FRz 0. 8389 = tan -1 = ? 32. 9 ° FRx ? 1. 297 Discussion Note that the magnitude of the anchoring force is 1. 54 kN, and its line of action makes –32. 9 ° from +x direction. Negative value for FRx indicates assumed direction is wrong, and should be reversed. ? = tan -1 FRz FRx Water 1 30 kg/s 50 m2 W 6-9 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-27 Water accelerated by a nozzle strikes the back surface of a cart moving horizontally at a constant velocity. The braking force and the power wasted by the brakes are to be determined. . Assumptions 1 The flow is steady and incompressible. 2 The water splatters off the sides of the plate in all direction s in the plane of the back surface. The water jet is exposed to the atmosphere, and thus the pressure of the water jet and the splattered water is the atmospheric pressure which is disregarded since it acts on all surfaces. 4 Fiction during motion is negligible. 5 There is no acceleration of the cart. 7 The motions of the water jet and the cart are horizontal. 6 Jet flow is nearly uniform and thus the effect of the momentum-flux correction factor is negligible, ? ? 1. Analysis We take the cart as the control volume, and the direction of flow as the positive direction of x axis. The relative velocity between the cart and the jet is V r = V jet ?Vcart = 15 ? 10 = 10 m/s 15 m/s 5 m/s Therefore, we can assume the cart to be stationary and the jet to move Waterjet with a velocity of 10 m/s. The momentum equation for steady onedimensional flow in the x (flow) direction reduces in this case to r r r & & & & F= ? mV ? ? mV > FRx = ? mi Vi > Fbrake = ? mV r FRx ? ? out ? in We note that the brake force acts in the opposite direction to flow, and we should not forget the negative sign for forces and velocities in the negative x-direction. Substituting the given values, ? 1N & Fbrake = ? mV r = ? (25 kg/s)(+10 m/s)? ? 1 kg ? m/s 2 ? ? ? = ? 250 N ? ?The negative sign indicates that the braking force acts in the opposite direction to motion, as expected. Noting that work is force times distance and the distance traveled by the cart per unit time is the cart velocity, the power wasted by the brakes is 1 kW ? ? & W = FbrakeV cart = (250 N)(5 m/s)? ? = 1. 25 kW ? 1000 N ? m/s ? Discussion Note that the power wasted is equivalent to the maximum power that can be generated as the cart velocity is maintained constant. 6-10 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation.If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Fl ow Systems 6-28 Water accelerated by a nozzle strikes the back surface of a cart moving horizontally. The acceleration of the cart if the brakes fail is to be determined. Analysis The braking force was determined in previous problem to be 250 N. When the brakes fail, this force will propel the cart forward, and the accelerating will be a= F 250 N ? 1 kg ? m/s 2 ? = m cart 300 kg ? 1N ? ? ? = 0. 833 m/s 2 ? ? Discussion This is the acceleration at the moment the brakes fail.The acceleration will decrease as the relative velocity between the water jet and the cart (and thus the force) decreases. 5 m/s 15 m/s 300 kg Waterjet FRx 6-11 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-29E A water jet hits a stationary splitter, such that half of the flow is diverted up ward at 45 °, and the other half is directed down.The force required to hold the splitter in place is to be determined. vEES Assumptions 1 The flow is steady and incompressible. 2 The water jet is exposed to the atmosphere, and thus the pressure of the water jet before and after the split is the atmospheric pressure which is disregarded since it acts on all surfaces. 3 The gravitational effects are disregarded. 4 Jet flow is nearly uniform and thus the effect of the momentum-flux correction factor is negligible, ? ? 1. Properties We take the density of water to be 62. 4 lbm/ft3. Analysis The mass flow rate of water jet is & & m = ? V = (62. lbm/ft 3 )(100 ft 3 /s) = 6240 lbm/s We take the splitting section of water jet, including the splitter as the control volume, and designate the entrance by 1 and the outlet of either arm by 2 (both arms have the same velocity and mass flow rate). We also designate the horizontal coordinate by x with the direction of flow as being the positive direction and the vertical coordinate by z. r r r & & The momentum equation for steady one-dimensional flow is F= ? mV ? ? mV . We let ? ? out ? in the x- and y- components of the anchoring force of the splitter be FRx and FRz, and assume them to be in the & & positive directions.Noting that V2 = V1 = V and m 2 = 1 m , the momentum equations along the x and z 2 axes become & & & FRx = 2( 1 m)V 2 cos ? ? mV1 = mV (cos ? ? 1) 2 & & FRz = 1 m(+V 2 sin ? ) + 1 m(? V 2 sin ? ) ? 0 = 0 2 2 Substituting the given values, 1 lbf ? ? FRx = (6240 lbm/s)(20 ft/s)(cos45 ° – 1)? ? = ? 1135 lbf 32. 2 lbm ? ft/s 2 ? ? FRz = 0 The negative value for FRx indicates the assumed direction is wrong, and should be reversed. Therefore, a force of 1135 lbf must be applied to the splitter in the opposite direction to flow to hold it in place. No holding force is necessary in the vertical direction.This can also be concluded from the symmetry. Discussion In reality, the gravitational effects will cau se the upper stream to slow down and the lower stream to speed up after the split. But for short distances, these effects are indeed negligible. 20 ft/s 100 ft/s FRz 45 ° 45 ° FRx 6-12 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-30E Problem 6-29E is reconsidered.The effect of splitter angle on the force exerted on the splitter as the half splitter angle varies from 0 to 180 ° in increments of 10 ° is to be investigated. g=32. 2 â€Å"ft/s2† rho=62. 4 â€Å"lbm/ft3† V_dot=100 â€Å"ft3/s† V=20 â€Å"ft/s† m_dot=rho*V_dot F_R=-m_dot*V*(cos(theta)-1)/g â€Å"lbf† ?,  ° 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 8000 7000 6000 5000 & m , lbm/s 6240 6240 6240 6240 6240 6240 6240 6240 6240 6240 624 0 6240 6240 6240 6240 6240 6240 6240 6240 FR, lbf 0 59 234 519 907 1384 1938 2550 3203 3876 4549 5201 5814 6367 6845 7232 7518 7693 7752 FR, lbf 000 3000 2000 1000 0 0 20 40 60 80 100 120 140 160 180 ?,  ° 6-13 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-31 A horizontal water jet impinges normally upon a vertical plate which is held on a frictionless track and is initially stationary. The initial acceleration of the plate, the time it takes to reach a certain velocity, and the velocity at a given time are to be determined.Assumptions 1 The flow is steady and incompressible. 2 The water always splatters in the plane of the retreating plate. 3 The water jet is exposed to the atmosphere, and thus the pressure of the water jet and the splattered water is the a tmospheric pressure which is disregarded since it acts on all surfaces. 4 The tract is nearly frictionless, and thus fiction during motion is negligible. 5 The motions of the water jet and the cart are horizontal. 6 The velocity of the jet relative to the plate remains constant, Vr = Vjet = V. 7 Jet flow is nearly uniform and thus the effect of the momentum-flux correction factor is egligible, ? ? 1. Properties We take the density of water to be 1000 kg/m3. Analysis (a) We take the vertical plate on the frictionless track as the control volume, and the direction of flow as the positive direction of x axis. The mass flow rate of water in the jet is & m = ? VA = (1000 kg/m 3 )(18 m/s)[? (0. 05 m) 2 / 4] = 35. 34 kg/s The momentum equation for steady one-dimensional flow in the x (flow) direction reduces in this case to r r r & & & & F= ? mV ? ? mV > FRx = ? mi Vi > FRx = ? mV ? ? out ? in where FRx is the reaction force required to hold the plate in place.When the plate is released, a n equal and opposite impulse force acts on the plate, which is determined to ? 1N & Fplate = ? FRx = mV = (35. 34 kg/s)(18 m/s)? ? 1 kg ? m/s 2 ? ? ? = 636 N ? ? Then the initial acceleration of the plate becomes a= Fplate m plate = 636 N ? 1 kg ? m/s 2 ? 1000 kg ? 1 N ? ? ? = 0. 636 m/s 2 ? ? 18 m/s 1000 kg Waterjet Frictionless track This acceleration will remain constant during motion since the force acting on the plate remains constant. (b) Noting that a = dV/dt = ? V/? t since the acceleration a is constant, the time it takes for the plate to reach a velocity of 9 m/s is ? t = ? V plate a = (9 ? ) m/s 0. 636 m/s 2 FRx = 14. 2 s (c) Noting that a = dV/dt and thus dV = adt and that the acceleration a is constant, the plate velocity in 20 s becomes V plate = V0, plate + a? t = 0 + (0. 636 m/s 2 )(20 s) = 12. 7 m/s Discussion The assumption that the relative velocity between the water jet and the plate remains constant is valid only for the initial moments of motion when the plate velocity is low unless the water jet is moving with the plate at the same velocity as the plate. 6-14 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation.If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-32 A 90 ° reducer elbow deflects water downwards into a smaller diameter pipe. The resultant force exerted on the reducer by water is to be determined. Assumptions 1 The flow is steady, frictionless, one-dimensional, incompressible, and irrotational (so that the Bernoulli equation is applicable). 2 The weight of the elbow and the water in it is disregarded since the gravitational effects are negligible. 3 The momentum-flux correction factor for each inlet and outlet is given to be ? 1. 04. Properties We take the density of water to be 1000 kg/m3. Analysis We take the elbow as the control volume, and designate the entrance by 1 and the outlet by 2. We also designate the horizontal coordinate by x (with the direction of flow as being the positive direction) and the vertical coordinate by z. The continuity equation for this one-inlet one-outlet steady flow system is & & & & m1 = m 2 = m = 353. 4 kg/s. Noting that m = ? AV , the mass flow rate of water and its outlet velocity are 2 & m = ? V1 A1 = ? V1 (? D1 / 4) = (1000 kg/m 3 )(5 m/s)[? (0. 3 m) 2 / 4] = 353. 4 kg/s & & 353. kg/s m m = = = 20 m/s 2 ? A2 D 2 / 4 (1000 kg/m 3 )[? (0. 15 m) 2 / 4] The Bernoulli equation for a streamline going through the center of the reducing elbow is expressed as V2 = P V12 P V2 1 + + z1 = 2 + 2 + z2 ? g 2 g ? g 2 g > ? V 2 ? V22 ? ? P2 = P + ? g ? 1 1 ? 2 g + z1 ? z2 ? ? ? Substituting, the gage pressure at the outlet becomes ? (5 m/s)2 ? (20 m/s)2 1 kPa ? 1 kN ? P2 = (300 kPa) + (1000 kg/m 3 )(9. 81 m/s 2 )? + 0. 5 = 117. 4 kPa 2 ? 1000 kg ? m/s 2 1 kN/m 2 ? 2(9. 81 m/s ) ? ? The momentum equation for steady one-dimensional flow is & & ? F = ? ?mV ? ? ? mV . We let the xout in r r and z- components of the anchoring force of the elbow be FRx and FRz, and assume them to be in the positive directions. Then the momentum equations along the x and z axes become & FRx + P1,gage A1 = 0 ? ? mV1 & FRz ? P2,gage A2 = ? m(? V 2 ) ? 0 Note that we should not forget the negative sign for forces and velocities in the negative x or z direction. Solving for FRx and FRz, and substituting the given values, ? 1 kN & FRx = ? ?mV1 ? P1, gage A1 = ? 1. 04(353. 4 kg/s)(5 m/s)? ? 1000 kg ? m/s 2 ? ? ? (0. 3 m) 2 ? ? (300 kN/m 2 ) = ? 23. 0 kN ? 4 ? ? ? (0. 15 m) 2 ? + (117. 4 kN/m 2 ) = ? 5. 28 kN ? ? FRz ? 1 kN & FRz = ? ? mV 2 + P2, gage A1 = ? 1. 04(353. 4 kg/s)(20 m/s)? ? 1000 kg ? m/s 2 ? and 2 2 FR = FRx + FRz = (? 23. 0) 2 + (? 5. 28) 2 = 23. 6 kN FRx 30 cm Water 5 m/s ? = tan -1 FRz ? 5. 28 = tan -1 = 12. 9 ° FRx ? 23. 0 Discussion The magnitude of the anchoring force is 23. 6 kN, and its line of action makes 12. 9 ° from +x direction. Negative values for FRx and FRy indicate that the assumed directions are wrong, and should be reversed. 15 cm 6-15 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation.If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-33 A wind turbine with a given span diameter and efficiency is subjected to steady winds. The power generated and the horizontal force on the supporting mast of the turbine are to be determined. vEES Assumptions 1 The wind flow is steady and incompressible. 2 The efficiency of the turbine-generator is independent of wind speed. 3 The frictional effects are negligible, and thus none of the incoming kinetic energy is converted to thermal energy. Wind flow is uniform and thus the momentum-flux correction factor is nearly unity, ? ? 1. Properties The density of air is given to be 1. 25 kg/m3. Analysis (a) The power potential of the wind is its kinetic energy, & which is V2/2 per unit mass, and mV 2 / 2 for a given mass flow rate: ? 1 m/s ? V1 = (25 km/h)? ? = 6. 94 m/s ? 3. 6 km/h ? & m = ? 1V1 A1 = ? 1V1 Wind V1 1 2 D V2 ?D 2 4 2 = (1. 25 kg/m 3 )(6. 94 m/s) ? (90 m) 2 4 2 = 55,200 kg/s V (6. 94 m/s) & & & W max = mke1 = m 1 = (55,200 kg/s) 2 2 ? 1 kN ? ? 1000 kg ? m/s 2 ? 1 kW ? 1 kN ? m/s ? = 1330 kW ? ? FR Then the actual power produced becomes & Wact = ? wind turbineW max = (0. 32)(1330 kW) = 426 kW (b) The frictional effects are assumed to be negligible, and thus the portion of incoming kinetic energy not converted to electric power leaves the wind turbine as outgoing kinetic energy. Therefore, V2 V2 & & & & mke 2 = mke1 (1 ? ? wind turbine ) > m 2 = m 1 (1 ? ? wind turbine ) 2 2 or V 2 = V1 1 ? ? wind turbine = (6. 94 m/s) 1 – 0. 32 = 5. 72 m/s We choose the control volume around the wind turbine such that the wind is norm al to the control surface at the inlet and the outlet, and the entire control surface is at the atmospheric pressure.The momentum r r r & & equation for steady one-dimensional flow is F= ? mV ? ? mV . Writing it along the x-direction ? ? out ? in (without forgetting the negative sign for forces and velocities in the negative x-direction) and assuming the flow velocity through the turbine to be equal to the wind velocity give ? 1 kN & & & FR = mV 2 ? mV1 = m(V 2 ? V1 ) = (55,200 kg/s)(5. 72 – 6. 94 m/s)? ? 1000 kg ? m/s 2 ? ? ? = ? 67. 3 kN ? ? The negative sign indicates that the reaction force acts in the negative x direction, as expected.Discussion This force acts on top of the tower where the wind turbine is installed, and the bending moment it generates at the bottom of the tower is obtained by multiplying this force by the tower height. 6-16 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for c ourse preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-34E A horizontal water jet strikes a curved plate, which deflects the water back to its original direction.The force required to hold the plate against the water stream is to be determined. Assumptions 1 The flow is steady and incompressible. 2 The water jet is exposed to the atmosphere, and thus the pressure of the water jet and the splattered water is the atmospheric pressure, which is disregarded since it acts on all surfaces. 3 Friction between the plate and the surface it is on is negligible (or the friction force can be included in the required force to hold the plate). 4 There is no splashing of water or the deformation of the jet, and the reversed jet leaves horizontally at the same velocity and flow rate. Jet flow is nearly uniform and thus the momentum-flux correction factor is nearly unity, ? ? 1. Properties We take the density of w ater to be 62. 4 lbm/ft3. Analysis We take the plate together with the curved water jet as the control volume, and designate the jet inlet by 1 and the outlet by 2. We also designate the horizontal coordinate by x (with the direction of incoming flow as being the positive direction). The continuity equation for this one-inlet one-outlet steady & & & flow system is m1 = m 2 = m where & m = ? VA = ? V [? D 2 / 4] = (62. 4 lbm/ft 3 )(140 ft/s)[? (3 / 12 ft) 2 / 4] = 428. lbm/s r r r & & The momentum equation for steady one-dimensional flow is F= ? mV ? ? mV . Letting the ? ? out ? in reaction force to hold the plate be FRx and assuming it to be in the positive direction, the momentum equation along the x axis becomes & & & FRx = m(? V 2 ) ? m(+V1 ) = ? 2mV Substituting, 1 lbf ? ? FRx = ? 2(428. 8 lbm/s)(140 ft/s)? ? = ? 3729 lbf 2 ? 32. 2 lbm ? ft/s ? Therefore, a force of 3729 lbm must be applied on the plate in the negative x direction to hold it in place. Discussion Note that a nega tive value for FRx indicates the assumed direction is wrong (as expected), and should be reversed.Also, there is no need for an analysis in the vertical direction since the fluid streams are horizontal. 2 140 ft/s Waterjet FRx 1 140 ft/s 3 in 6-17 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-35E A horizontal water jet strikes a bent plate, which deflects the water by 135 ° from its original direction. The force required to hold the plate against the water stream is to be determined.Assumptions 1 The flow is steady and incompressible. 2 The water jet is exposed to the atmosphere, and thus the pressure of the water jet and the splattered water is the atmospheric pressure, which is disregarded since it acts on all surfaces. 3 Frictional and gravitational effec ts are negligible. 4 There is no splattering of water or the deformation of the jet, and the reversed jet leaves horizontally at the same velocity and flow rate. 5 Jet flow is nearly uniform and thus the momentum-flux correction factor is nearly unity, ? ? 1. Properties We take the density of water to be 62. 4 lbm/ft3.Analysis We take the plate together with the curved water jet as the control volume, and designate the jet inlet by 1 and the outlet by 2. We also designate the horizontal coordinate by x (with the direction of incoming flow as being the positive direction), and the vertical coordinate by z. The continuity equation for & & & this one-inlet one-outlet steady flow system is m1 = m 2 = m where & m = ? VA = ? V [? D 2 / 4] = (62. 4 lbm/ft 3 )(140 ft/s)[? (3 / 12 ft) 2 / 4] = 428. 8 lbm/s r r r & & The momentum equation for steady one-dimensional flow is F= ? mV ? ? mV . We let the x- ? ? out ? in nd z- components of the anchoring force of the plate be FRx and FRz, and assu me them to be in the positive directions. Then the momentum equations along the x and y axes become & & & FRx = m(? V 2 ) cos 45 ° ? m(+V1 ) = ? mV (1 + cos 45 °) & (+V 2 ) sin 45 ° = mV sin 45 ° & FRz = m Substituting the given values, 1 lbf ? ? FRx = ? 2(428. 8 lbm/s)(140 ft/s)(1 + cos45 °)? 2 ? ? 32. 2 lbm ? ft/s ? = ? 6365 lbf 1 lbf ? ? FRz = (428. 8 lbm/s)(140 ft/s)sin45 °? = 1318 lbf 2 ? ? 32. 2 lbm ? ft/s ? 2 140 ft/s Waterjet 135 ° FRz FRx 3 in 1 and 2 2 FR = FRx + FRz = (? 6365) 2 + 1318 2 = 6500 lbf , ? = tan -1 FRy FRx = tan -1 1318 = ? 1. 7 ° = 168. 3 ° ? 6365 Discussion Note that the magnitude of the anchoring force is 6500 lbf, and its line of action makes 168. 3 ° from the positive x direction. Also, a negative value for FRx indicates the assumed direction is wrong, and should be reversed. 6-18 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-36 Firemen are holding a nozzle at the end of a hose while trying to extinguish a fire.The average water outlet velocity and the resistance force required of the firemen to hold the nozzle are to be determined. Assumptions 1 The flow is steady and incompressible. 2 The water jet is exposed to the atmosphere, and thus the pressure of the water jet is the atmospheric pressure, which is disregarded since it acts on all surfaces. 3 Gravitational effects and vertical forces are disregarded since the horizontal resistance force is to be determined. 5 Jet flow is nearly uniform and thus the momentum-flux correction factor can be taken to be unity, ? ? 1. Properties We take the density of water to be 1000 kg/m3.Analysis (a) We take the nozzle and the horizontal portion of the hose as the system such that water enters the control volume vertically and outlets horizontally (thi s way the pressure force and the momentum flux at the inlet are in the vertical direction, with no contribution to the force balance in the horizontal direction), and designate the entrance by 1 and the outlet by 2. We also designate the horizontal coordinate by x (with the direction of flow as being the positive direction). The average outlet velocity and the mass flow rate of water are determined from V= V& A = V& ? D / 4 2 = 5 m 3 /min ? (0. 06 m) 2 / 4 1768 m/min = 29. 5 m/s & m = ? V& = (1000 kg/m 3 )(5 m 3 /min) = 5000 kg/min = 83. 3 kg/s (b) The momentum equation for steady one-dimensional flow is & & ? F = ? ?mV ? ? ? mV . We let out in r r r horizontal force applied by the firemen to the nozzle to hold it be FRx, and assume it to be in the positive x direction. Then the momentum equation along the x direction gives ? ? 1N ? = 2457 N & & FRx = mVe ? 0 = mV = (83. 3 kg/s)(29. 5 m/s)? ? 1kg ? m/s 2 ? ? ? Therefore, the firemen must be able to resist a force of 2457 N to hold t he nozzle in place. Discussion The force of 2457 N is equivalent to the weight of about 250 kg.That is, holding the nozzle requires the strength of holding a weight of 250 kg, which cannot be done by a single person. This demonstrates why several firemen are used to hold a hose with a high flow rate. FRz FRx 5 m3/min 6-19 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-37 A horizontal jet of water with a given velocity strikes a flat plate that is moving in the same direction at a specified velocity.The force that the water stream exerts against the plate is to be determined. Assumptions 1 The flow is steady and incompressible. 2 The water splatters in all directions in the plane of the plate. 3 The water jet is exposed to the atmosphere, and thus the pressure o f the water jet and the splattered water is the atmospheric pressure, which is disregarded since it acts on all surfaces. 4 The vertical forces and momentum fluxes are not considered since they have no effect on the horizontal force exerted on the plate. 5 The velocity of the plate, and the velocity of the water jet relative to the plate, are constant. Jet flow is nearly uniform and thus the momentum-flux correction factor can be taken to be unity, ? ? 1. Properties We take the density of water to be 1000 kg/m3. Analysis We take the plate as the control volume, and the flow direction as the positive direction of x axis. The mass flow rate of water in the jet is & m = ? V jet A = ? V jet 10 m/s 30 m/s FRx 5 cm Waterjet ?D 4 2 = (1000 kg/m 3 )(30 m/s) ? (0. 05 m) 2 4 = 58. 9 kg/s The relative velocity between the plate and the jet is V r = V jet ? V plate = 30 ? 10 = 20 m/s Therefore, we can assume the plate to be stationary and the jet to move with a velocity of 20 m/s.The r r r & & F= ? mV ? ? mV . We let the horizontal momentum equation for steady one-dimensional flow is ? ? out ? in reaction force applied to the plate in the negative x direction to counteract the impulse of the water jet be FRx. Then the momentum equation along the x direction gives ? ? 1N ? & & ? FRx = 0 ? mVi > FRx = mV r = (58. 9 kg/s)(20 m/s)? ? 1kg ? m/s 2 ? = 1178 N ? ? Therefore, the water jet applies a force of 1178 N on the plate in the direction of motion, and an equal and opposite force must be applied on the plate if its velocity is to remain constant.Discussion Note that we used the relative velocity in the determination of the mass flow rate of water in the momentum analysis since water will enter the control volume at this rate. (In the limiting case of the plate and the water jet moving at the same velocity, the mass flow rate of water relative to the plate will be zero since no water will be able to strike the plate). 6-20 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Comp anies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission.Chapter 6 Momentum Analysis of Flow Systems 6-38 Problem 6-37 is reconsidered. The effect of the plate velocity on the force exerted on the plate as the plate velocity varies from 0 to 30 m/s in increments of 3 m/s is to be investigated. rho=1000 â€Å"kg/m3† D=0. 05 â€Å"m† V_jet=30 â€Å"m/s† Ac=pi*D^2/4 V_r=V_jet-V_plate m_dot=rho*Ac*V_jet F_R=m_dot*V_r â€Å"N† Vplate, m/s 0 3 6 9 12 15 18 21 24 27 30 Vr, m/s 30 27 24 21 18 15 12 9 6 3 0 FR, N 1767 1590 1414 1237 1060 883. 6 706. 9 530. 1 353. 4 176. 7 0 1800 1600 1400 1200 1000 FR, N 800 600 400 200 0 0 5 10 15 20 25 30 Vplate, m/s 6-21PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you ar e using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-39E A fan moves air at sea level at a specified rate. The force required to hold the fan and the minimum power input required for the fan are to be determined. v Assumptions 1 The flow of air is steady and incompressible. 2 Standard atmospheric conditions exist so that the pressure at sea level is 1 atm. Air leaves the fan at a uniform velocity at atmospheric pressure. 4 Air approaches the fan through a large area at atmospheric pressure with negligible velocity. 5 The frictional effects are negligible, and thus the entire mechanical power input is converted to kinetic energy of air (no conversion to thermal energy through frictional effects). 6 Wind flow is nearly uniform and thus the momentum-flux correction factor can be taken to be unity, ? ? 1. Properties The gas constant of air is R = 0. 3704 psi? ft3/lbm? R. The standard atmospheric pressure at sea level is 1 atm = 14. 7 psi.Analysis (a) We take the control volume to be a horizontal hyperbolic cylinder bounded by streamlines on the sides with air entering through the large cross-section (section 1) and the fan located at the narrow cross-section at the end (section 2), and let its centerline be the x axis. The density, mass flow rate, and discharge velocity of air are 14. 7 psi P ? = = = 0. 0749 lbm/ft 3 RT (0. 3704 psi ? ft 3 /lbm ? R)(530 R) & m = ? V& = (0. 0749 lbm/ft 3 )(2000 ft 3/min) = 149. 8 lbm/min = 2. 50 lbm/s V2 = V& A2 = V& 2 ? D 2 / 4 = 2000 ft 3 /min ? (2 ft) 2 / 4 = 636. 6 ft/min = 10. ft/s & & ? F = ? ?mV ? ? ? mV . Letting the out in The momentum equation for steady one-dimensional flow is r r r reaction force to hold the fan be FRx and assuming it to be in the positive x (i. e. , the flow) direction, the momentum equation along the x axis becomes 1 lbf ? ? & & FRx = m(V 2 ) ? 0 = mV = (2. 50 lbm/s)(10. 6 ft/s)? ? = 0. 82 lbf 2 ? 32. 2 lbm ? ft/s ? Therefore, a force of 0. 82 lbf must be applied (through frict ion at the base, for example) to prevent the fan from moving in the horizontal direction under the influence of this force. (b) Noting that P1 = P2 = Patm and V1 ? , the energy equation for the selected control volume reduces to ?P V2 ? ?P V2 ? & & & & & m? 1 + 1 + gz1 ? + W pump, u = m? 2 + 2 + gz 2 ? + W turbine + E mech,loss > ? ? ? ? 2 2 ? ? ? ? Substituting, V & & Wfan, u = m 2 2 2 V2 (10. 6 ft/s) 2 ? 1 lbf 1W ? & & Wfan,u = m 2 = (2. 50 lbm/s) ? ? = 5. 91 W 2 2 2 ? 32. 2 lbm ? ft/s 0. 73756 lbf ? ft/s ? Therefore, a useful mechanical power of 5. 91 W must be supplied to 2000 cfm air. This is the minimum required power input required for the fan. Discussion The actual power input to the fan will be larger than 5. 1 W because of the fan inefficiency in converting mechanical power to kinetic energy. Fan 1 2 24 in 6-22 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-40 A helicopter hovers at sea level while being loaded. The volumetric air flow rate and the required power input during unloaded hover, and the rpm and the required power input during loaded hover are to be determined. Assumptions 1 The flow of air is steady and incompressible. 2 Air leaves the blades at a uniform velocity at atmospheric pressure. 3 Air approaches the blades from the top through a large area at atmospheric pressure with negligible velocity. 4 The frictional effects are negligible, and thus the entire mechanical power input is converted to kinetic energy of air (no conversion to thermal energy through frictional effects). 5 The change in air pressure with elevation is negligible because of the low density of air. 6 There is no acceleration of the helicopter, and thus the lift generated is equal to the total weight. Air flow is nearly uniform and thus the momentum-flux correction factor can be taken to be unity, ? ? 1. Properties The density of air is given to be 1. 18 kg/m3. Analysis (a) We take the control volume to be a vertical hyperbolic cylinder bounded by streamlines on the sides with air entering through the large cross-section (section 1) at the top and the fan located at the narrow cross-section at the bottom (section 2), and let its centerline be the z axis with upwards being the positive direction. r r r & & F= ? mV ? ? mV . Noting The momentum equation for steady one-dimensional flow is ? out ? in that the only force acting on the control volume is the total weight W and it acts in the negative z direction, the momentum equation along the z axis gives W & & ? W = m(? V 2 ) ? 0 > W = mV 2 = ( ? AV 2 )V 2 = ? AV 22 > V2 = ? A 1 where A is the blade span area, 15 m A = ? D / 4 = ? (15 m) / 4 = 176. 7 m 2 2 2 Then the discharge velocity, volume flow rate, and the mass flow rate of air in the unloaded mode become V 2,unloaded = m unloaded g = ? A (10,000 kg)(9. 81 m/s 2 ) (1. 18 kg/m 3 )(176. 7 m 2 ) = 21. 7 m/s Sea level 2 V&unloaded = AV 2,unloaded = (176. 7 m 2 )(21. m/s) = 3834 m 3 /s & munloaded = ? V&unloaded = (1. 18 kg/m 3 )(3834 m 3/s) = 4524 kg/s Load 15,000 kg Noting that P1 = P2 = Patm, V1 ? 0, the elevation effects are negligible, and the frictional effects are disregarded, the energy equation for the selected control volume reduces to ? P V2 ? ?P V2 ? V2 & & & & & & & m? 1 + 1 + gz1 ? + W pump, u = m? 2 + 2 + gz 2 ? + W turbine + E mech,loss > Wfan, u = m 2 ? ? ? ? 2 2 2 ? ? ? ? Substituting, ? V2 ? 1 kW ? (21. 7 m/s) 2 ? 1 kN & ? ? & = (4524 kg/s) W unloaded fan,u = ? m 2 ? ? = 1065 kW 2 ? 1 kN ? m/s ? 1000 kg ? m/s ? ? 2 ? 2 ? ? ? ? nloaded (b) We now repeat the calculations for the loaded helicopter, whose mass is 10,000+15,000 = 25,000 kg: V 2,loaded = m loaded g = ? A (25,000 kg)(9. 81 m/s 2 ) (1. 18 kg/m 3 )(176. 7 m 2 ) = 34. 3 m/s & mloaded = ? V&loaded = ? AV2, loaded = (1. 18 kg/m 3 )(176. 7 m 2 )(34. 3 m/s) = 7152 kg/s ? V2 ? (34. 3 m/s)2 & & = (7152 kg/s) Wloaded fan,u = ? m 2 ? ? 2 ? 2 ? ?loaded ? 1 kW ? 1 kN ? ? ? 1000 kg ? m/s 2 1 kN ? m/s ? = 4207 kW ? ? 6-23 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation.If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems Noting that the average flow velocity is proportional to the overhead blade rotational velocity, the rpm of the loaded helicopter blades becomes & V 2 = kn > V 2,loaded V 2, unloaded = & n loaded & n unloaded > & n loaded = V 2,loaded V 2, unloaded & n unloaded = 34. 3 (400 rpm) = 632 rpm 21. 7 Discussion The actual power input to the helicopter blades will be considerably larger than the calculated power input because of the fan inefficiency in converting mechanical power to kinetic energy. -24 PROPRIETARY MATERIAL.  © 200 6 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission. Chapter 6 Momentum Analysis of Flow Systems 6-41 A helicopter hovers on top of a high mountain where the air density considerably lower than that at sea level. The blade rotational velocity to hover at the higher altitude and the percent increase in the required power input to hover at high altitude relative to that at sea level are to be determined. Assumptions 1 The flow of air is steady and incompressible. 2 The air leaves the blades at a uniform velocity at atmospheric pressure. 3 Air approaches the blades from the top through a large area at atmospheric pressure with negligible velocity. 4 The frictional effects are negligible, and thus the entire mechanical power input is converted to kinetic energy of air. 5 The change in air pressure with elevation while hovering at a given locatio n is negligible because of the low density of air. 6 There is no acceleration of the helicopter, and thus the lift generated is equal to the total weight. Air flow is nearly uniform and thus the momentum-flux correction factor can be taken to be unity, ? ? 1. Properties The density of air is given to be 1. 18 kg/m3 at sea level, and 0. 79 kg/m3 on top of the mountain. Analysis (a) We take the control volume to be a vertical hyperbolic cylinder bounded by streamlines on the sides with air entering through the large cross-section (section 1) at the top and the fan located at the narrow cross-section at the bottom (section 2), and let its centerline be the z axis with upwards being the positive direction. r r & & F= ? mV ? ? mV . Noting The momentum equation for steady one-dimensional flow is ? ? out ? in that the only force acting on the control volume is the total weight W and it acts in the negative z direction, the momentum equation along the z axis gives W & & ? W = m(? V 2 ) ? 0 > W = mV 2 = ( ? AV 2 )V 2 = ? AV 22 > V2 = ? A where A is the blade span area. Then for a given weight W, the ratio of discharge velocities becomes V 2,mountain V 2,sea = W / ? mountain A W / ? sea A = ? sea ? mountain = 1. 18 kg/m 3 0. 79 kg/m 3 = 1. 222Noting that the average flow velocity is proportional to the overhead blade rotational velocity, the rpm of the helicopter blades on top of the mountain becomes & n = kV 2 > & n mountain V 2, mountain = & n sea V 2,sea > & n mountain = V 2, mountain V 2,sea & nsea = 1. 222(400 rpm) = 489 rpm Noting that P1 = P2 = Patm, V1 ? 0, the elevation effect are negligible, and the frictional effects are disregarded, the energy equation for the selected control volume reduces to ? P V2 ? ?P V2 ? V2 & & & & & & & m? 1 + 1 + gz1 ? + W pump, u = m? 2 + 2 + gz 2 ? W turbine + E mech,loss > Wfan, u = m 2 ? ? ? ? 1 2 2 2 ? ? ? ? or V2 V2 V3 & & Wfan,u = m 2 = ? AV2 2 = ? A 2 = 2 2 2 1 2 ?A? ? ? W ? ? = ? ? ? A ? 3 1 2 ?A? ? ?W ? ? ? ? ? A ? 1 . 5 = W 1 . 5 2 ? A 15 m Then the ratio of the required power input on top of the mountain to that at sea level becomes & Wmountain fan,u 0. 5W 1. 5 / ? mountain A = & Wsea fan,u 0. 5W 1. 5 / ? sea A 2 ? mountain ?sea = 1. 18 kg/m3 = 1. 222 0. 79 kg/m3 Sea level Load 15,000 kg Therefore, the required power input will increase by 22. 2% on top of the mountain relative to the sea level.Discussion Note that both the rpm and the required power input to the helicopter are inversely proportional to the square root of air density. Therefore, more power is required at higher elevations for the helicopter to operate because air is less dense, and more air must be forced by the blades into the downdraft. 6-25 PROPRIETARY MATERIAL.  © 2006 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers and educators for course preparation. If you are a student using this Manual, you are using it without permission.Chapter 6 Momentum Analysis of Flow Systems 6-42 The flow rate in a channel is controlled by a sluice gate by raising or lowering a vertical plate. A relation for the force acting on a sluice gate of width w for steady and uniform flow is to be developed. Assumptions 1 The flow is steady, incompressible, frictionless, and uniform (and thus the Bernoulli equation is applicable. ) 2 Wall shear forces at surfaces are negligible. 3 The channel is exposed to the atmosphere, and thus the pressure at free surfaces is the atmospheric pressure. 4 The flow is horizontal. Water flow is nearly uniform and thus the momentum-flux correction factor can be taken to be unity, ? ? 1. Analysis We take point 1 at the free surface of the upstream flow before the gate and point 2 at the free surface of the downstream flow after the gate. We also take the bottom surface of the channel as the reference level so that the elevations of points 1 and 2 are y1 and y2, respectively. The application of the Bernoulli equation between points 1 and 2 gives P1 V12 P V2 + + y1 = 2 + 2 + y 2 ? g 2 g ? g 2 g > V 22 ? V12 = 2 g( y1 ? y 2 ) (1)The flow is assumed to be incompressible and thus the density is constant. Then the conservation of mass relation for this single stream steady flow device can be expressed as V&1 = V&2 = V& > A1V1 = A2V 2 = V& > V1 = V& A1 = V& wy1 and V2 = V& A2 = V& wy 2 (2) Substituting into Eq. (1), ? V& ? ? wy ? 2 ? ? V& ? 2 g ( y1 ? y 2 ) & ? ? ? ? wy ? = 2 g ( y1 ? y 2 ) > V = w 1 / y 2 ? 1 / y 2 ? ? 1? 2 1 2 2 2 g ( y1 ? y 2 ) > V& = wy 2 2 2 1 ? y 2 / y1 (3) Substituting Eq. (3) into Eqs. (2) gives the following relations for velocities, V1 = y2 y1 2 g ( y1 ? y 2 ) 1? y2 / 2 y1 and V2 = 2 g ( y1 ? y 2 ) 2 2 1 ? y 2 / y1 (4) We choose the control volume as the water body surrounded by the vertical cross-sections of the upstream and downstream flows, free surfaces of water, the inner surface of the sluice gate, and the bottom surface of r r r & & F= ? mV ? ? mV . The the channel. The momentum equation for steady one-dimensional flow is ? ? out ? in force acting on the sluice gate FRx is horizontal